Przeglądaj wg Autor "Koci, Kamila"

Teraz wyświetlane 1 - 2 z 2
  • Miniatura
    PozycjaOpen Access
    Influence of the calcination of TiO2-reduced graphite hybrid for the photocatalytic reduction of carbon dioxide
    (Elsevier, 2021-06-09) Morawski, Antoni Waldemar; Kusiak-Nejman, Ewelina; Wanag, Agnieszka; Narkiewicz, Urszula; Edelmannova, Miroslava; Reli, Martin; Koci, Kamila; Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydział Technologii i Inżynierii Chemicznej. Katedra Technologii Chemicznej Nieorganicznej i Inżynierii Środowiska; Technical University of Ostrava. Institute of Environmental Technology; West Pomeranian University of Technology in Szczecin. Faculty of Chemical Technology and Engineering. Department of Inorganic Chemical Technology and Environment Engineering
    In this work, a conversion of carbon dioxide (CO2) into methane, carbon monoxide, as well as hydrogen was investigated. The TiO2/rGO photocatalysts were prepared by two steps: solvothermal method and calcination at 500, 800, and 1000 ◦C in an argon atmosphere. The obtained samples were characterized by X-ray diffraction (XRD), UV–vis diffuse reflection spectroscopy (UV–vis/DRS), N2 adsorption-desorption and analysis of carbon content. The activity of photocatalysts was evaluated in the photocatalytic reduction of CO2. The TiO2/rGO-10 without calcination showed the highest activity toward CO2 conversion. It was found that all samples after rGO modification exhibited good activity toward H2 generation with high selectivity. The enhanced photocatalytic performance was attributed mainly to the presence of graphene due to its excellent electron transport/collection ability.
  • Miniatura
    PozycjaOpen Access
    Photocatalytic reduction of CO2 over Ti3+ self-doped TiO2-based nanomaterials
    (Elsevier, 2024-02-14) Ricka, Rudolf; Wanag, Agnieszka; Kusiak-Nejman, Ewelina; Moszynski, Dariusz; Edelmannova, Miroslava Filip; Reli, Martin; Badura, Zdenek; Zoppellaro, GIorgio; Zboril, Radek; Morawski, Antoni W.; Koci, Kamila; Institute of Environmental Technology, CEET, VSB-Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava-Poruba, Czech Republic; Faculty of Materials Science and Technology, VˇSB-Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava-Poruba, Czech Republic; West Pomeranian University of Technology in Szczecin, Faculty of Chemical Technology and Engineering, Department of Inorganic Technology and Environment Engineering, ul. Pułaskiego 10, 70-322 Szczecin, Poland; West Pomeranian University of Technology in Szczecin, Faculty of Chemical Technology and Engineering, Department of Inorganic Technology and Environment Engineering, ul. Pułaskiego 10, 70-322 Szczecin, Poland Szczecin, Poland; West Pomeranian University of Technology in Szczecin, Faculty of Chemical Technology and Engineering, Department of Inorganic Technology and Environment Engineering, ul. Pułaskiego 10, 70-322 Szczecin, Poland; Institute of Environmental Technology, CEET, VSB-Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava-Poruba, Czech Republic; Institute of Environmental Technology, CEET, VSB-Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava-Poruba, Czech Republic; Regional Centre of Advanced Technologies and Materials, Czech Advanced Technology and Research Institute (CATRIN), Palacký University, ˇSlechtitelů 27, 783 71 Olomouc, Czech Republic; Nanotechnology Centre, CEET, VˇSB-Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava-Poruba, Czech Republic; Regional Centre of Advanced Technologies and Materials, Czech Advanced Technology and Research Institute (CATRIN), Palacký University, ˇSlechtitelů 27, 783 71 Olomouc, Czech Republic; Nanotechnology Centre, CEET, VˇSB-Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava-Poruba, Czech Republic; Regional Centre of Advanced Technologies and Materials, Czech Advanced Technology and Research Institute (CATRIN), Palacký University, ˇSlechtitelů 27, 783 71 Olomouc, Czech Republic; Nanotechnology Centre, CEET, VˇSB-Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava-Poruba, Czech Republic; West Pomeranian University of Technology in Szczecin, Faculty of Chemical Technology and Engineering, Department of Inorganic Technology and Environment Engineering, ul. Pułaskiego 10, 70-322 Szczecin, Poland; Institute of Environmental Technology, CEET, VˇSB-Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava-Poruba, Czech Republic; Department of Physics and Materials Engineering, Faculty of Technology, Tomas Bata University in Zlín, Vavreˇckova 275, Czech Republic
    In this study, we explored the photocatalytic efficacy of Ti3+-doped TiO2-based photocatalysts for CO2 reduction. The Ti3+ self-doped photocatalysts were synthesized using a straightforward chemical reduction with sodium borohydride (NaBH4). Our investigation aimed to elucidate the intricate interplay between the synthesis process and the quantity of NaBH4 reductant on the physical-chemical and photocatalytic attributes of the defective TiO2-based photocatalysts. We explored three different commercially available TiO2 materials labeled P25, (S) TiO2, and KRONOClean7050, which were reduced (2 g of TiO2) with 0.75 and 1.5 g of NaBH4. The reduction with 0.75 g of NaBH4 led to a significant decrease of photocatalytic activity in all three cases. It was caused by clogging of the photocatalysts surface by sodium ions which resulted in the surface recombination of charge carriers. Oppositely, the reduction with 1.5 g of NaBH4, led to an increase of the photocatalytic activity with superior performance of KRONOClean7050. The comprehensive characterization of all the samples explained this superior performance of KC7050_RED_1.5 sample. Importantly, it did not contain any amorphous phase and the crystal size was two times higher compared to other 2 samples reduced by 1.5 g of NaBH4. In the addition to higher crystallinity, the formation of a disordered TiO2− x layer, enriched with Ti3+ defects and oxygen vacancies, was confirmed. These structural features enhance the light absorption and mitigate undesired recombination of photogenerated charge carriers. These results would trigger farther investigation of defect engineering towards enhancement of the efficiency of metal oxide photocatalysts.