Badanie przemian fazowych nanokrystalicznych azotków żelaza o określonej wielkości krystalitów
Ładowanie...
Data
2024
Tytuł czasopisma
ISSN czasopisma
Tytuł tomu
Wydawca
Abstrakt
Azotowanie żelaza i stali od ponad stu lat stosowane jest do polepszania właściwości materiałów narażonych na ekstremalne warunki. Obecnie, w związku z ich wyjątkowymi właściwościami, poszukuje się zastosowania nanomateriałów z układu żelazo-azot w rekultywacji gleb, oczyszczaniu wód, katalizie i szeroko pojętej elektronice. Pierwszą część rozprawy stanowi wprowadzenie do tematyki dotyczącej układu Fe-N, w szczególności o ograniczonych wymiarach charakterystycznych, omówienie podstaw stosowanych metod badawczych i opisanie metod służących do określania rozmiarów charakterystycznych materiałów. W literaturze przedmiotu wskazano, że zmiana wymiarów charakterystycznych materiału azotowanego wpływa znacząco na warunki procesu mającego na celu otrzymanie konkretnej fazy krystalicznej. Mimo wieloletnich badań, informacje na temat różnic w mechanizmie azotowania pomiędzy materiałami litymi, a nanokrystalicznymi, nie są kompletne. W drugiej części rozprawy skupiono się na omówieniu metodyki badawczej. W prezentowanej rozprawie zastosowano metody in situ, takie jak proszkowa dyfraktometria rentgenowska i termo grawimetria, uzupełnione obrazowaniem za pomocą mikroskopii elektronowej, mikroanalizą rentgenowską, dyfrakcją elektronową i metodami analizy składu chemicznego, do systematycznego badania procesów azotowania i odazotowania w materiałach o różnych wielkościach krystalitów, z zakresu przyjętego dla materiałów nanokrystalicznych, i różniących się rozkładem wielkości krystalitów. Skupiono się na analizie stanów uznawanych jako quasi-stacjonarne. Wyniki badań przedstawionych w rozprawie pozwoliły potwierdzić szereg wcześniejszych obserwacji dotyczących procesów azotowania i odazotowania nanokrystalicznego żelaza i jego azotków. Zastosowane podejście umożliwiło zaobserwowanie pominiętych dotychczas niuansów, które szczegółowo omówiono. Główną nowością prezentowanych badań jest zwrócenie uwagi i przedstawienie dowodów eksperymentalnych na istnienie zjawiska spójności granic fazowych podczas przemian w układzie Fe-N. Zjawisko to wiąże się z występowaniem naprężenia przystosowującego, które wpływa na energię Gibbsa układu. W związku z tym istnieją różnice w potencjale azotowym wymaganym do zajścia przemian w materiałach o różnych wielkościach krystalitów. W szczególności zjawisko to jest głównym powodem występowania histerezy pomiędzy procesami azotowania i odazotowania w nanokrystalicznym układzie żelazo-azot.
Nitriding of iron and steel has been utilized for over a hundred years to enhance the properties of materials subject to extreme conditions. Currently, due to their exceptional properties, the application of nanomaterials from the iron-nitrogen system is sought in soil and water remediation, catalysis and electronics. The first part of the dissertation is an introduction to the subject of the Fe-N system, in particular with limited characteristic dimensions, a discussion of the basics of the utilised research methods and a description of the methodology that could be used to determine the characteristic dimensions of materials. The literature on the subject indicates, that changing the characteristic dimensions of the material subjected to nitriding significantly affects the conditions of the process necessary to obtain a specific crystalline phase. Despite decades of research, information on the differences in the nitriding mechanism between bulk and nanocrystalline materials is not complete. The second part of the dissertation focuses on the discussion of the research methodology. In the presented study, in situ methods such as X-ray powder diffraction and thermogravimetry, supplemented by ex situ electron microscopy imaging, X-ray microanalysis, electron diffraction and chemical composition analysis methods were used. The nitriding and denitriding processes in materials with different crystallite sizes and size distributions within the range adopted for nanocrystalline materials were systematically studied. The focus was on the analysis of reaction states considered quasi-stationary. The results of the research presented in the dissertation allowed to confirm a number of observations that were previously reported on the nitriding and denitriding of nanocrystalline iron and its nitrides. The utilised approach allowed to observe nuances that had been omitted so far, which were discussed in detail. The main novelty of the presented study is to draw attention to and present experimental evidence for the existence of the phenomenon of phase boundary coherence during transformations in the Fe-N system. This phenomenon is associated with the existence of a coherency strain that affects the Gibbs energy of the system. Therefore, there are differences in the nitriding potential required for transformations in materials with different crystallite sizes. In particular, this phenomenon is the main reason for the occurrence of hysteresis between nitriding and denitriding processes in the nanocrystalline iron-nitrogen system.
Nitriding of iron and steel has been utilized for over a hundred years to enhance the properties of materials subject to extreme conditions. Currently, due to their exceptional properties, the application of nanomaterials from the iron-nitrogen system is sought in soil and water remediation, catalysis and electronics. The first part of the dissertation is an introduction to the subject of the Fe-N system, in particular with limited characteristic dimensions, a discussion of the basics of the utilised research methods and a description of the methodology that could be used to determine the characteristic dimensions of materials. The literature on the subject indicates, that changing the characteristic dimensions of the material subjected to nitriding significantly affects the conditions of the process necessary to obtain a specific crystalline phase. Despite decades of research, information on the differences in the nitriding mechanism between bulk and nanocrystalline materials is not complete. The second part of the dissertation focuses on the discussion of the research methodology. In the presented study, in situ methods such as X-ray powder diffraction and thermogravimetry, supplemented by ex situ electron microscopy imaging, X-ray microanalysis, electron diffraction and chemical composition analysis methods were used. The nitriding and denitriding processes in materials with different crystallite sizes and size distributions within the range adopted for nanocrystalline materials were systematically studied. The focus was on the analysis of reaction states considered quasi-stationary. The results of the research presented in the dissertation allowed to confirm a number of observations that were previously reported on the nitriding and denitriding of nanocrystalline iron and its nitrides. The utilised approach allowed to observe nuances that had been omitted so far, which were discussed in detail. The main novelty of the presented study is to draw attention to and present experimental evidence for the existence of the phenomenon of phase boundary coherence during transformations in the Fe-N system. This phenomenon is associated with the existence of a coherency strain that affects the Gibbs energy of the system. Therefore, there are differences in the nitriding potential required for transformations in materials with different crystallite sizes. In particular, this phenomenon is the main reason for the occurrence of hysteresis between nitriding and denitriding processes in the nanocrystalline iron-nitrogen system.
Opis
Słowa kluczowe
nanomateriały, azotki żelaza, przemiany fazowe, nanokryształy, wielkość krystalitów, spójność granic fazowych, badanie materiałów
Cytowanie
Albrecht, A. J. (2024). Badanie przemian fazowych nanokrystalicznych azotków żelaza o określonej wielkości krystalitów : rozprawa doktorska, 187 s. Szczecin, 2024.
https://hdl.handle.net/20.500.12539/4357